BMW R 1250RS, Руководство пользователя для мотоциклиста

Страница: 138 / 279

Phase 1
All indicator and warning lights
are switched on.
After a longer vehicle standstill
period, an animation is displayed
when the system starts up.
Phase 2
The general warning light
changes from red to yellow.
Phase 3
All the indicator and warning
lights switched on in the initial
phase are switched off in reverse
sequence.
The malfunction indicator lamp
only goes out after 15 seconds.
If one of the indicator and warn-
ing lights did not switch on:
WARNING
Faulty warning lights
No indication of malfunctions
Check all the telltale and warn-
ing lights.
Have the fault rectified as
quickly as possible by a
specialist workshop, preferably
an authorised BMW Motorrad
Retailer.
ABS self-diagnosis
BMW Motorrad Integral ABS per-
forms self-diagnosis to ensure its
operability. Self-diagnosis is per-
formed automatically when you
switch on the ignition
Phase 1
Test of the diagnosable system
components with the vehicle at
a standstill.
ABS indicator and warning
light flashes.
Phase 2
Test of the wheel-speed
sensors as the vehicle pulls
away from rest.
ABS indicator and warning
light flashes.
ABS self-diagnosis
completed
The ABS telltale and warning
light goes out.
Check all the indicator and
warning lights.
ABS self-diagnosis not
completed
The ABS function is not avail-
able, because self-diagnosis
did not complete. (The motor-
cycle has to reach a defined
minimum speed for the wheel
speed sensors to be checked:
5 km/h)
If an indicator showing an ABS
fault appears when ABS self-dia-
gnosis completes:
You can continue to ride. Bear
in mind that neither the ABS
7
136
z Riding