BMW R 1200GS 2016, Руководство пользователя для мотоциклиста

Страница: 47 / 243

Upshift recommendation
The upshift recommendation
must be switched on in the
display settings (
58).
Upshift recommendation 1 sig-
nals the economically best point
in time for upshifting.
Upshift recommendation
Up arrow is displayed.
Possible cause:
The speed for the next higher
gear was reached.
Upshift.
The arrow disappears.
Gear not programmed
with gearshift assistant Pro OE
The gear indicator flashes.
The gearshift assistant Pro
has no function.
Possible cause:
with gearshift assistant Pro OE
The transmission sensor has not
been programmed completely.
Shift to idle
N
and let engine
run at least 10 seconds while
the motorcycle is stationary so
that idle can be programmed
in.
Use clutch control to shift to
all gears and drive at least 10
seconds in each gear.
The gear indicator stops flash-
ing when the transmission sen-
sor has been programmed suc-
cessfully.
If the transmission sensor has
been programmed completely,
the Pro gearshift assistant will
operate as described (
126).
If the programming procedure
is unsuccessful, have the fault
eliminated at a specialist work-
shop, preferably an authorized
BMW Motorrad retailer.
Hazard warning lights
system switched on
General warning light
flashes red.
Turn signal indicator light
flashes green.
Possible cause:
The hazard warning lights system
was switched on by the rider.
Switching off the hazard warn-
ing lights system (
56).
3
45
z Displays