BMW R 1200 GS -, Руководство пользователя для мотоциклиста, Страница: 68 / 229

The ASC telltale and warn-
ing light goes out; if self-
diagnosis has not completed, the
warning light starts to flash.
Release button 1 within two
seconds.
The ASC telltale and warn-
ing light still does not light
or continues to flash.
The ASC function is activated.
You also have the option of
switching the ignition off and
then on again.
NOTICE
An ASC fault has occurred if the
ASC telltale and warning light
shows when the motorcycle ac-
celerates to a speed in excess
of 5 km/h after the ignition was
switched off and then on again.
NOTICE
See the section entitled "Engin-
eering details" for more inform-
ation on BMW Motorrad Auto-
matic Stability Control (ASC).
Electronic Suspension
Adjustment (ESA)
with Dynamic ESA
OE
Dynamic ESA Possible
settings
Using the electronic chassis ad-
justment Dynamic ESA you can
comfortably adapt your motor-
cycle to the actual vehicle load.
Via ride height sensors, Dynamic
ESA detects the movements in
the chassis and suspension and
responds to the same by ad-
justing the damper valves. The
chassis and suspension will thus
be adapted to the characteristics
of the terrain.
Starting from the basic setting
NORMAL, the damping can be
made harder (HARD) or softer
(SOFT).
The ESA calibrates at regular
intervals at a standstill with the
engine running to ensure the
system is functioning properly.
Chassis adjustment is not pos-
sible during this calibration.
with Pro riding modes
OE
The setting of the chassis and
suspension and the number of
the selectable damping variants
depend on the riding mode se-
lected. The damping defined by
the riding mode can be changed
by the rider.
If the coding plug is not fitted,
the basic setting specified by the
riding mode will be set after each
mode change. If the coding plug
is fitted, the driver's adjustments
are retained for all modes.
4
66
z Operation