BMW R 1100 S EVO, Руководство по обслуживанию, Страница: 8 / 95

00.3
00
Tightening torque
Model R 1150 R
Connection
11 Engine
Cylinder head
Tightening sequence:
1 Tighten cylinder head nuts (oiled) in go-
nally opposite sequence
1.1 Tighten all nuts to closing torque Nm 20
1.2 Tighten all nuts to correct angle ° 90
1.3 Tighten all nuts to correct angle ° 90
2 M 10 screw Nm 40
3 M 6 screw Nm 9
After 1,000 km (600 miles), tighten cylinder
head nuts in diagonally opposite se-
quence:
1 Slacken one nut
2 Tighten nut to initial torque Nm 20
3 Tighten nut to wrench angle ° 180
4 Slacken and retighten M 10 screw Nm 40
Timing gear carrier to cylinder head Nm 9
Bearing cap on rocker shaft Nm 18
Locknut, valve adjusting screw Nm 8
Cylinder head cover to cylinder head Nm 8
Camshaft end cover to cylinder head Nm 9
Air intake connection to cylinder head Nm 9
Camshaft
Chain sprocket to camshaft Nm 65
Camshaft bearing cap Nm 15
Alternator mount cover
M 6 screw Nm 9
M 8 screw Nm 20
Auxiliary shaft
Chain sprocket to crankshaft Nm 10
Chainwheel to auxiliary shaft Nm 70
Chain tensioner housing to engine block Nm 9