BMW ONBOARD COMPUTER, Руководство по эксплуатации

Страница: 17 / 99

16 n
Operating principle
Calling up MENU
Various functions are integrated into the
on-board computer. If you call up the
top menu (MENU), these are displayed,
see page
12 .
Call up "MENU"
If you select a function in MENU, you
are offered either adjustment options or
further menus:
>
See "Selecting function" for details of
how to select functions
>
See "More functions" for details of
how to display further functions
>
For details of how to adjust the way
the computer switches between
menus, see "Last function memory"
on page
17
>
For details of how to return to a
higher level, see "Selecting return
symbol" on page
17
>
For details of how to call up further
entries in lists, see "Browsing forward
and back" on page
17 .
To return to the main MENU level from
any other menu or function:
Selecting function
To select a function, please perform
two steps with the rotary control:
1. Mark a function
Turn right-hand rotary control until
the desired function is highlighted
2. Confirm the choice of function
Press right-hand rotary control.
These two steps are expressed collec-
tively on the following pages as:
Select "Function"
More functions
If the screen shows one of the above
symbols, you can call up more func-
tions on the menu you have chosen.
To do this, turn the right-hand rotary
control in the direction of the symbol in
question. You can now highlight and
select one of the functions shown, see
"Selecting function".
Depending on the extent of the
function, it may take a few
seconds for the screen to display the
additional functions.
<
Online Edition for Part No. 01 41 0 156 676 - © 01/02 BMW AG