BMW G 650 GS Sertao Скачать руководство пользователя страница 61

Страница: 61 / 133

Cases

with Vario cases

Opening cases

Turn key

in the case lock to

right angles with the forward
direction of travel.
Press and hold down yellow
latch

and pull up carry

handle

Push yellow button

down

and at the same time pull the
lid of the case out.

Closing cases

Turn the lock with the key until
it is at right angles to the for-
ward direction of travel.

Close the case lid.
The lid engages with an aud-
ible click.

Closing the carry handle
while the case lock is in

line with the forward direction of
travel can result in damage to the
locking tongue.
Make sure that the case lock is
at right angles to the forward dir-
ection of travel when you close
the carry handle.

Push carry handle

down.

Turn the key in the case lock
in line with the forward direc-

Accessories

ProCarManuals.com

Содержание G 650 GS Sertao






































































































































Результаты поиска

Содержание G 650 GS Sertao

Отзывы:

BMW G 650 GS Sertao, Руководство пользователя для мотоциклиста, Страница: 61 / 133

Результаты поиска

Содержание G 650 GS Sertao

Отзывы: