BMW F 800 R 2010 Скачать руководство пользователя страница 62

Страница: 62 / 144

Brake early until the full braking
action is available again.

Parking your
motorcycle

Side stand

Switch off engine.

If the ground is soft or un-
even, there is no guaran-

tee that the motorcycle will rest
firmly on the stand.
Always check that the ground
under the stand is level and
firm.

Fold out side stand and park

motorcycle.

The side stand is designed
to support only the weight

of the motorcycle.
Do not lean or sit on the
motorcycle with the side stand
extended.

If the slope of the road per-

mits, turn the handlebars to the
left.

On a grade, the motorcycle

should always face uphill; se-
lect 1st gear.

Center stand

with center stand

Switch off engine.

If the ground is soft or un-
even, there is no guaran-

tee that the motorcycle will rest
firmly on the stand.
Always check that the ground
under the stand is level and
firm.

Excessive movements
could result in the center

stand retracting, and the
motorcycle would topple as a
result.
Do not sit on the motorcycle
while it is resting on the center
stand.

Fold out center stand and jack

up motorcycle.

Refueling

Fuel is highly flammable.
Fire at the fuel tank can

result in fire and explosion.
Do not smoke. Never bring a
naked flame near the fuel tank.

Fuel expands when ex-
posed to heat. When the

tank is overfilled, fuel can escape
and get onto the road. This re-
sults in a danger of falling.
Do not overfill the fuel tank.

Fuel attacks plastic sur-
faces, making them cloudy

or unattractive.
Wipe off any fuel that gets onto
plastic parts immediately.

Leaded fuel will destroy the
catalytic converter.

Use only unleaded fuel.

Riding

Содержание F 800 R 2010

















































































































































Результаты поиска

Содержание F 800 R 2010

Отзывы:

Бренды по названию

Популярные бренды

BMW F 800 R 2010, Руководство пользователя для мотоциклиста

Результаты поиска

Содержание F 800 R 2010

Отзывы:

Бренды по названию

Популярные бренды