BMW F 800 GT 2015, Руководство пользователя для мотоциклиста

Страница: 65 / 171

Step 3 : Which alarm tone is to
be selected?
Rising and falling:
Press button 1 .
Intermittent:
Press button 2 .
Step 4 : Is the alarm function
to be automatically activated
after the ignition is switched
off?
Yes:
Press button 1 .
No:
Press button 2 .
When is the programming
canceled?
There are two ways to cancel
programming:
By switching off the ignition
before the last programming
step.
Automatically if more than 30
seconds pass between two
programming steps.
The data are not saved when
programming is canceled.
Save programming
There are two ways to save pro-
gramming:
By switching off the ignition
after the last programming step
Automatically 30 seconds after
the last programming step
The DWA indicator light stops
flashing and acknowledgment
tones sound.
Logging on additional
remote controls
with anti-theft alarm OE
When is it necessary to
log on a remote control?
Should you log on an additional
remote control or want to replace
a lost remote control, then you
must always log on all remote
controls with the DWA. You can
log on a maximum of four remote
controls.
Logging on remote
control
Deactivate alarm function.
Switch on ignition.
Press button
2 three times.
5
63
z Alarm system
ProCarManuals.com