BMW F 700 GS, Руководство пользователя для мотоциклиста

Страница: 117 / 157

Begin by connecting one end
of the red jump lead to the
positive terminal of the dis-
charged battery and the other
end to the positive terminal of
the donor battery (positive on
this vehicle: position
2 ).
Then connect one end of the
black jump lead to the negat-
ive terminal of the donor bat-
tery and the other end to the
negative terminal of the dis-
charged battery (negative on
this vehicle: position
1 ).
The spring-strut screw can
be used as an alternative to
the battery's negative terminal.
Run the engine of the donor
vehicle during jump-starting.
Start the engine of the vehicle
with the discharged battery
in the usual way; if the en-
gine does not start, wait a few
minutes before repeating the
attempt in order to protect the
starter motor and the donor
battery.
Allow both engines to idle for a
few minutes before disconnect-
ing the jump leads.
Disconnect the jump lead from
the negative terminals first,
then disconnect the second
lead from the positive termin-
als.
Do not use proprietary
start-assist sprays or other
products to start the engine.
Installing centre trim panel
(
113).
Battery
Maintenance instructions
Correct upkeep, recharging and
storage will prolong the life of
the battery and are essential if
warranty claims are to be con-
sidered.
Compliance with the points be-
low is important in order to max-
imise battery life:
Keep the surface of the battery
clean and dry.
Do not open the battery.
Do not top up with water.
Be sure to read and comply
with the instructions for char-
ging the battery on the follow-
ing pages.
Do not turn the battery upside
down.
9
115
z Maintenance