BMW C 650 Sport, Руководство пользователя для мотоциклиста

Страница: 70 / 170

routine runs automatically when
you switch on the ignition.
Phase 1
Check on system components
monitored by diagnostic sys-
tem while motorcycle is parked.
ASC warning light flashes
slowly.
Phase 2
Checks diagnosis-capable sys-
tem components when motor-
cycle starts to move.
ASC warning light flashes
slowly.
ASC self-diagnosis
completed
The ASC symbol is no longer
displayed.
Watch all warning and indicator
lights on the display.
ASC self-diagnosis rou-
tine not completed
The Maxi­Scooter must reach
a specified minimum speed
with the engine running before
the system can check opera-
tion of the wheel speed sen-
sors:
min 3 mph (min 5 km/h)
If an ASC error is displayed after
the ASC self-diagnosis is com-
pleted:
It remains possible to continue
riding. It must be noted that
the ASC function is not avail-
able.
Have the malfunction corrected
as soon as possible at an
authorized service facility,
preferably an authorized
BMW Motorrad Retailer.
If the ASC adjusts without re-
quest, too often or too soon,
refer to the troubleshooting ta-
ble for help. (
128)
Riding
At engine speeds below approx-
imately 1800 rpm, the centrifu-
gal clutch opens and the Maxi-
Scooter is idling. If the engine
speed is increased, the clutch
closes and the Maxi-Scooter
drives off.
In the range from approximately
25 mph (40 km/h) to approxi-
mately 75 mph (120 km/h), the
engine operates at almost con-
stant speed in the range of the
maximum torque. The change in
speed is achieved by CVT. This
only slightly changes the engine
noise in this speed range.
Speeds above approximately
75 mph (120 km/h) are achieved
by increasing the engine speed.
6
68
z Riding