BMW 318D, Руководство пользователя

Страница: 259 / 430

▷ External interference with the ultrasound, for
example by passing vehicles or loud ma‐
chines.
▷ Sensors which are dirty, iced up, damaged or
incorrectly adjusted.
▷ Certain weather conditions; for example, high
humidity, wet conditions, snowfall, cold, ex‐
treme heat or strong wind.
▷ Trailer drawbars and tow hitches of other ve‐
hicles.
▷ Thin or wedge-shaped objects.
▷ Moving objects.
▷ Higher protruding objects, for example pro‐
jecting walls.
▷ Objects with corners, edges and smooth sur‐
faces.
▷ Objects with fine surfaces or structures, for
example fences.
▷ Objects with porous surfaces.
▷ Small and low objects such as boxes.
▷ Obstacles and people at the edge of the lane.
▷ Soft obstacles or obstacles covered in foam.
▷ Plants or shrubs.
▷ Low objects already indicated, for example
kerbs, may enter the sensors' blind areas be‐
fore or after a continuous tone is given.
▷ The system does not take into account loads
projecting beyond the outline of the vehicle.
False alarms
Under the following conditions, the system may
issue a warning even though there is no obstacle
in the detection range:
▷ In heavy rain.
▷ If the sensors are heavily soiled or covered
with ice.
▷ If the sensors are covered with snow.
▷ On rough road surfaces.
▷ On uneven surfaces, for example speed
bumps.
▷ In large, rectangular buildings with smooth
walls, for example underground car parks.
▷ In washing bays and car washes.
▷ Due to dense exhaust fumes.
▷ If the cover of the trailer tow hitch is incor‐
rectly seated.
▷ Due to other ultrasonic sources, for example
sweeping machines, steam-jet cleaners or
neon lights.
To reduce false alarms, for example in automatic
car washes, switch off automatic activation of
PDC when obstacles are detected if necessary.
Malfunction
A Check Control message is shown.
A white symbol is shown and the capture
area of the sensors is shown in dark col‐
our on the Control Display.
PDC has failed. Have the system checked by a
Service Partner of the manufacturer or another
qualified Service Partner or a specialist work‐
shop.
Without Surround View:
rear-view camera
Principle
The rear-view camera provides assistance when
reverse parking or manoeuvring. It does this by
showing an image of the area behind the vehicle
on the Control Display.
Safety note
WARNING
The system does not relieve you of your per‐
sonal responsibility to assess the traffic situa‐
tion correctly. There is a risk of accident. Adapt
your driving style to the traffic conditions. Addi‐
tionally, look directly to check the traffic situa‐
Seite 259
Driver Assistance Systems
CONTROLS
259
Online Edition for Part no. xxx - VI/19