BMW 2011 R 1200 GS Скачать руководство пользователя страница 78

Страница: 78 / 167

alternative fuel grade

with regular unleaded (RON
91)

Regular unleaded (power-
and consumption-related
restrictions)
91 ROZ/RON
87 AKI

Usable fuel capacity

approx. 33 l

Reserve fuel

approx. 4 l

Press the fuel tank cap down
firmly to close.
Remove the key and close the
protective cap.

Securing motorcycle
for transportation

Make sure that all components
that might come into contact
with straps used to secure the
motorcycle are adequately pro-
tected against scratching. Use
adhesive tape or soft cloths, for
example, for this purpose.

The motorcycle can topple
and fall on its side.

Make sure that the motorcycle
cannot topple sideways.

Push the motorcycle onto the
transportation flat and hold it in

position: do not place it on the
side stand or centre stand.

Risk of damaging compon-
ents.

Take care not to trap
components such as brake lines
or wires.

At the front, secure the straps
to the handlebars on both
sides.
Pass the straps through the
leading link and tighten the
straps.

Riding

ProCarManuals.com

Содержание 2011 R 1200 GS








































































































































































Результаты поиска

Содержание 2011 R 1200 GS

Отзывы:

BMW 2011 R 1200 GS, Руководство пользователя для мотоциклиста, Страница: 78 / 167

Результаты поиска

Содержание 2011 R 1200 GS

Отзывы: