BMW 2011 R 1200 GS, Руководство пользователя для мотоциклиста, Страница: 43 / 167

Electrically powered accessor-
ies remain operational for a lim-
ited period of time.
The battery can be recharged
via the socket.
Locking handlebars
If the motorcycle is on the
side stand, the surface
of the ground will determine
whether it is better to turn the
handlebars to the left or right.
However, the motorcycle is more
stable on a level surface with the
handlebars turned to the left than
with the handlebars turned to the
right.
On level ground, always turn the
handlebars to the left to set the
steering lock.
Turn the handlebars to the full
left or right lock position.
Turn the key to position 3 ,
while moving the handlebars
slightly.
Ignition, lights and all function
circuits switched off.
Handlebars locked.
Key can be removed.
Electronic immobiliser
EWS
The motorcycle's electronics
exchange certain continuously
changing signals with the elec-
tronics in the key; these signals
are specific to your motorcycle
and they are transmitted via the
ring aerial in the ignition lock.
The ignition is not enabled for
starting until the engine control
unit has recognised the key as
"authorised" for your motorcycle.
A spare key attached to
the same ring as the ig-
nition key used to start the en-
gine could "irritate" the electron-
ics, in which case the enabling
signal for starting is not issued.
The
EWS
warning appears in the
multifunction display.
Always keep the spare key sep-
arately from the ignition key.
If you mislay a key you can have
the key in question barred by
your authorised BMW Motorrad
dealer. In order to have a key
barred you must bring along all
the other keys belonging to the
motorcycle.
The engine cannot be started by
a barred key, but a key that has
4
41
z Operation
ProCarManuals.com