55
The engine will start if you depress the
brake and press the start/stop button.
<
Avoid starting, stopping and restarting
the engine in rapid succession or
repeated attempts to start the engine if it does
not fire, otherwise unburned or only partially
combusted fuel could reach the catalytic con-
verter, which could overheat and sustain dam-
age as a result.
<
Remote control in the ignition lock or with com-
fort access in the vehicle, see page
.
1.
Depress the brake.
2.
Press the start/stop button.
Starting proceeds automatically for a certain
time, and ceases automatically as soon as the
engine has fired.
Diesel engine
When the engine is cold and the temperature is
below approx. 0
6
/32
7
, starting may be
delayed by automatic preheating. The preheat-
ing indicator light in the instrument cluster
lights up. A message appears on the control
display.
Stopping the engine
Always take the remote control with you
when you leave the car.
When parking on an incline, apply the parking
brake, otherwise the car could roll away.
<
Procedure
1.
With the car at a standstill, engage trans-
mission position P.
2.
Press the start/stop button.
3.
Apply the parking brake.
4.
Remove the remote control from the igni-
tion lock, see page
.
Before entering a car wash
The vehicle will be able to roll if you observe the
following steps:
1.
With comfort access
*
: insert the remote
control into the ignition lock.
2.
Depress the brake.
3.
Engage transmission position N.
4.
Release parking brake.
5.
Switch off the engine.
Transmission position P is engaged:
>
Automatically after approx. 30 minutes
>
If you remove the remote control from the
ignition lock
Parking brake
Principle
Your BMW is equipped with an electromechan-
ical parking brake that is applied and released
via a button.
The fundamental purpose of the parking brake
is to prevent the stationary vehicle from rolling
away.
With the engine switched off, the parking brake
acts on the rear wheels via an electromechani-
cal system. With the engine running, the park-
ing brake acts on the disc brakes of both the
front and the rear wheels via the brake hydrau-
lics.
Online Edition for Part-No. 01 41 0 013 209 - © 04/07 BMW AG
Содержание 2007 X5 3.0d
