BMW 2 COUPE 2023 Series, Руководство пользователя

Страница: 115 / 340

The selector lever automatically returns to
the center position when released.
Engaging selector lever position P
Press button P.
The transmission lock is engaged.
Rolling or pushing the vehicle
General information
In some situations, the vehicle is supposed to
roll without its own power for a short distance,
for instance in a car wash or to be pushed.
Engaging selector lever position N
NOTICE
Selector lever position P is automatically en-
gaged when standby state is switched off.
The wheels are blocked. There is a risk
of damage to property. Do not switch off
standby if the vehicle is meant to coast, e.g.,
in a car wash.
1. Switch on drive-ready state while pressing
on the brake pedal.
2. If necessary, release the parking brake and
switch off Automatic Hold.
3. Depress the brake pedal.
4. Engage selector lever position N.
5. Switch off drive-ready state.
In this way, standby state remains switched
on, and a Check Control message is dis-
played.
The vehicle can roll.
Selector lever position P is engaged automati-
cally after approximately 35 minutes.
If there is a malfunction, you may not be able
to change the selector lever position.
Electronically unlock the transmission lock, if
needed.
Additional information:
Electronic unlocking of the transmission lock,
refer to page 116 .
Kickdown
Kickdown is used to achieve maximum driving
performance.
Step on the accelerator pedal beyond the re-
sistance point at the full throttle position.
S Sport mode
Principle
The shifting points and shifting times in the
Sport program are designed for sportier han-
dling. The transmission, for instance shifts up
later and the shifting times are shorter.
Seite 115
Driving CONTROLS
115
Online Edition for Part no. 01405A5E788 - VI/22