BMW Motorrad S 1000XR 2020, Руководство пользователя для мотоциклиста

Страница: 51 / 259

Possible cause:
The fall sensor has detected a
fall and switched off the engine.
Raise the motorcycle to upright
position and check for possible
damage.
Switch ignition off and then on
again or switch emergency-off
switch on and then off again.
Side stand monitoring
faulty
Side stand monitoring
faulty Onward journey
possible. Stop engine
when stationary! Have
checked by workshop.
Possible cause:
The side-stand switch or its
wiring is damaged.
Contact a specialist workshop,
preferably an authorized
BMW Motorrad retailer.
ABS self-diagnosis not
completed
ABS indicator and warning
light flashes.
Possible cause:
ABS self-diagnosis not
completed
ABS is not available, as the
self-diagnosis routine was not
completed. (The motorcycle
must reach a specified mini-
mum speed before the system
can check operation of the
wheel speed sensors: 3 mph
(5 km/h))
Ride off slowly. Please note
that the ABS function is only
available after the self-diagno-
sis has completed.
ABS fault
ABS indicator and warning
light lights up.
Limited ABS avail-
ability! Onward jour-
ney possible. Ride care-
fully to next specialist
workshop.
Possible cause:
The ABS control unit has
detected an error. The
partial integral brake and the
Dynamic Brake Control function
have failed. The ABS function is
limited.
You may continue riding. Take
note of additional information
on special situations that can
lead to an ABS fault memory
entry (
134).
Have the malfunction corrected
as soon as possible at a spe-
cialist workshop, preferably an
authorized BMW Motorrad re-
tailer.
3
49
z Displays