BMW Motorrad S 1000XR 2020, Руководство пользователя для мотоциклиста

Страница: 119 / 259

Press starter button 1 .
NOTICE
The starting attempt is automati-
cally interrupted if battery voltage
is too low. Recharge the battery
before you attempt to start the
engine again, or use jumper ca-
bles and a donor battery to start.
More detailed information can
be found in the "Maintenance"
chapter under "Jump-starting".
Engine starts.
Consult the troubleshooting
chart if the engine refuses to
start. (
196)
Pre-Ride-Check
After switching on the ignition,
the instrument cluster performs a
test of the indicator and warning
lights – what we call the "Pre-
Ride-Check". Starting the engine
before the test routine is com-
pleted will cancel the remainder
of the routine.
Phase 1
All indicator and warning lights
are switched on.
After a longer standstill of the
vehicle, an animation is displayed
during the system start.
Phase 2
The general warning light
switches from red to yellow.
Phase 3
All switched-on indicator and
warning lights are switched off
one after the other in reverse or-
der.
If one of the indicator and warn-
ing lights has not been switched
on:
Have the malfunction corrected
as soon as possible at a spe-
cialist workshop, preferably an
authorized BMW Motorrad re-
tailer.
ABS self-diagnosis
The self-diagnosis routine checks
whether the BMW Motorrad In-
tegral ABS is ready for opera-
tion. The self-diagnosis routine
launches automatically when you
switch on the ignition.
Phase 1
Check on system components
monitored by diagnostic sys-
tem while motorcycle is parked.
ABS indicator and warning
light flashes.
7
117
z Riding