BMW Motorrad S 1000 R 2020 Скачать руководство пользователя страница 78

Страница: 78 / 286

OPERATION

Hill Start Control Pro is

only a comfort system to

make starting on hills easier

and should therefore not be

confused with a parking brake.

Hill Start Control Pro

drive-off assistant should

not be used for gradients of

more than 40%.

Apply handbrake lever

footbrake lever firmly and

then release again.

Alternatively, apply the brake

for about one second after

the vehicle has come to a

standstill, with a gradient of

at least 3%.

is displayed in green.

Hill Start Control Pro is acti-

vated.

To switch off Hill Start Con-

trol Pro, activate the hand-

brake lever

or the footbrake

lever again.

If Hill Start Control Pro

was deactivated using the

brake lever, automatic Hill Start

Control is deactivated for the

next 4.4 yards (4 m).

is hidden.

Alternatively, ride off in 1st or

2nd gear.

Hill Start Control Pro is

deactivated automatically

when driving off.

disappears after the brake

has been released com-

pletely.

Hill Start Control Pro is deac-

tivated.

For more information on Hill

Start Control Pro, see Chap-

ter "Technology in detail"

(

168).

Adjusting Hill Start Control

Pro

with riding modes Pro

Switching on the ignition

(

54).

Go to

Settings

Vehicle

settings

HSC Pro

menu.

To switch off Hill Start Con-

trol Pro, select

Off

Hill Start Control Pro is deac-

tivated.

To switch on manual Hill Start

Control Pro, select

Manual

Содержание S 1000 R 2020































































































































































































































































































Результаты поиска

Содержание S 1000 R 2020

Отзывы:

BMW Motorrad S 1000 R 2020, Руководство пользователя для мотоциклиста, Страница: 78 / 286

Результаты поиска

Содержание S 1000 R 2020

Отзывы: