BMW Motorrad S 1000 R 2020, Руководство пользователя для мотоциклиста, Страница: 55 / 286

49
Possible cause:
The Hill Start Control can not
be activated.
Fold in side stand.
Hill Start Control only func-
tions when the side stand is
folded in.
Start engine.
Hill Start Control only func-
tions with the engine running.
Gear not taught in
Gear indicator flashes.
The Gear Shift Assistant Pro
has no function.
Possible cause:
The transmission sensor has
not been completely taught in.
Engage neutral
N
and allow
the engine to run for at least
10 seconds while parked to
teach in the neutral position.
Shift all gears with clutch con-
trol and ride for at least 10
seconds in each engaged
gear.
The gear display stops flash-
ing when the transmission
sensor has been successfully
taught in.
Once the transmission sensor
has been fully taught in, the
Gear Shift Assistant Pro func-
tions as described ( 167).
If the teach-in procedure is
unsuccessful, have the fault
corrected at a specialist work-
shop, preferably an authorized
BMW Motorrad retailer.
Hazard warning flasher
switched on
flashes in green.
flashes in green.
Possible cause:
The hazard warning flasher was
switched on by the rider.
Operating the hazard warning
lights ( 60).
Launch Control not ready
Shiftpoint light lights up or
blinks.
L-Con not available.
Clutch too hot.
is dis-
played.
Possible cause:
The number of possible racing
starts with Launch Control has
been exceeded.
Let the clutch cool down.
with riding modes Pro OE
Using Launch Control
( 142).
Service display
If service is overdue, the
due date or the odome-
ter reading at which service
was due is accompanied by the
general warning light in yellow.