BMW Motorrad S 1000 R 2020 Скачать руководство пользователя страница 45

Страница: 45 / 286

lights up.

No communication
with engine control.

Multiple sys. affected.
Ride carefully to the
next specialist workshop

Engine in emergency

operation mode

lights up yellow.

Fault in the engine
control. Onward

journey possible.
Ride carefully to next
specialist workshop.

WARNING

Unusual handling when the

engine is in emergency op-

eration

Accident hazard

Avoid rapid acceleration and

passing maneuvers.

Possible cause:

The engine control unit has di-

agnosed a fault. In exceptional

cases, the engine stops and can

no longer be started. Other-

wise, the engine runs in emer-

gency operation.

Continued riding is possible,

however the accustomed en-

gine output and speed range

may not be available.

Have the malfunction

corrected as soon as possible

at a specialist workshop,

preferably an authorized

BMW Motorrad retailer.

Tire pressure

with tire pressure monitor

(TPM)

For the tire pressure display, in

addition to the

MY VEHICLE

menu window and the Check

Control messages, there is also

the

TIRE PRESSURE

window:

The values on the left relate to

the front wheel and the values

on the right relate to the rear

wheel.

The pressure differential is dis-

played via the actual and nomi-

nal tire pressure.

Immediately after switching on

the ignition, only dashes are

displayed. The transfer of the

tire pressure values does not

Содержание S 1000 R 2020































































































































































































































































































Результаты поиска

Содержание S 1000 R 2020

Отзывы:

BMW Motorrad S 1000 R 2020, Руководство пользователя для мотоциклиста, Страница: 45 / 286

Результаты поиска

Содержание S 1000 R 2020

Отзывы: