BMW Motorrad S 1000 R 2020 Скачать руководство пользователя страница 44

Страница: 44 / 286

DISPLAYS

Drive malfunction

Engine! Have checked
by a specialist

workshop.

Possible cause:

The engine control unit has

diagnosed a fault that affects

pollutant emission and/or per-

formance.

Have the malfunction cor-

rected at a specialist work-

shop, preferably an authorized

BMW Motorrad retailer.

You may continue driving

if the pollutant emission is

above the setpoint values.

Serious fault in the engine

control

flashes red.

Serious fault in the
engine control. On-

ward journey possible.
Damage possible. Have
checked by a workshop.

WARNING

Damage to engine during

emergency operation

Accident hazard

Drive slowly and avoid rapid

acceleration and passing

maneuvers.

If possible, have the vehi-

cle picked up and the fault

eliminated at a specialist

workshop, preferably an au-

thorized BMW Motorrad re-

tailer.

Possible cause:

The engine control unit has di-

agnosed a fault, which can lead

to a severe secondary fault.

The engine is in emergency

operation.

Continued riding is possi-

ble, however it is not recom-

mended.

Avoid high load and engine

speed ranges if possible.

Have the malfunction

corrected as soon as possible

at a specialist workshop,

preferably an authorized

BMW Motorrad retailer.

Engine control failure

lights up yellow.

Содержание S 1000 R 2020































































































































































































































































































Результаты поиска

Содержание S 1000 R 2020

Отзывы:

BMW Motorrad S 1000 R 2020, Руководство пользователя для мотоциклиста, Страница: 44 / 286

Результаты поиска

Содержание S 1000 R 2020

Отзывы: