BMW Motorrad S 1000 R 2020 Скачать руководство пользователя страница 210

Страница: 210 / 286

204

MAINTENANCE

to protect the starter motor

and the donor battery.

Allow both engines to idle for

a few minutes before discon-

necting jumper cables.

Disconnect the jumper cable

from the negative terminal

first, then from the positive

terminal.

Installing rider's seat (

78).

BATTERY

Maintenance instructions

Correct upkeep, recharging and

storage will prolong the service

life of the battery and are es-

sential for recognition of war-

ranty claims.

Compliance with the points

below is important in order to

maximize battery service life:

Keep the surface of the bat-

tery clean and dry.

Do not open the battery.

Do not top up with water.

Be sure to read and com-

ply with the instructions for

charging the battery on the

following pages.

Do not turn the battery upside

down.

ATTENTION

Discharging of the con-

nected battery by the

vehicle electronics (e.g.

clock)

Total discharge of battery

leading to a rejection of war-

ranty claims

During riding breaks of

more than 4 weeks, connect

a trickle-charger to the

battery.

BMW Motorrad has de-

veloped a trickle-charger

specially designed for com-

patibility with the electronics

of your motorcycle. Using this

charger, you can keep the bat-

tery charged during long pe-

riods when the motorcycle is

not being used without having

to disconnect the battery from

the motorcycle's onboard sys-

tems. Additional information

is available at your authorized

BMW Motorrad retailer.

Disconnecting battery from

vehicle

Park the vehicle, making sure

that the ground is firm and

level.

Removing the rider's seat

(

78).

Содержание S 1000 R 2020































































































































































































































































































Результаты поиска

Содержание S 1000 R 2020

Отзывы:

BMW Motorrad S 1000 R 2020, Руководство пользователя для мотоциклиста, Страница: 210 / 286

Результаты поиска

Содержание S 1000 R 2020

Отзывы: