BMW Motorrad S 1000 R 2020 Скачать руководство пользователя страница 172

Страница: 172 / 286

166

TECHNOLOGY IN DETAIL

Minimum speed for the

transmission of the TPC

measured values:
min 19 mph (min 30 km/h)

Before initial reception of the

tire pressure,

is shown in

the display for each tire. The

sensors continue to transmit

the measured readings for

some time after the vehicle

comes to a stop.

Transmission time of

the measured values af-

ter vehicle standstill:
min 15 min

If an RDC control unit is in-

stalled but the wheels have no

sensors, a fault memory entry is

generated.

Tire inflation pressure ranges

The RDC control unit distin-

guishes between three inflation

pressure ranges matched to

the motorcycle:

Tire pressure within the per-

missible tolerance

Tire pressure within the limit

range of the permissible toler-

ance

Tire pressure outside of the

permissible tolerance

Temperature compensation

The tire pressure is tempera-

ture dependent, i.e. it increases

or decreases together with the

tire air temperature. The tire

temperature is dependent on

the outside temperature, the

riding style and the length of

the journey.

The tire pressures

are shown in the TFT

display with temperature

compensation and are always

based on the following tire

air temperature:
68 °F (20 °C)

Tire pressure gages at gas sta-

tions do not make any com-

pensation for the air tempera-

ture, the tire pressure indicated

depends on the temperature

of the air in the tire. As a re-

sult, in most cases the values

displayed there do not match

the values shown in the TFT

display.

Tire pressure adjustment

Compare the RDC value in the

TFT display with the value on

the back cover of the Operat-

ing Instructions. The difference

between the two values must

be compensated with the tire

inflation pressure tester at the

filling station.

Содержание S 1000 R 2020































































































































































































































































































Результаты поиска

Содержание S 1000 R 2020

Отзывы:

BMW Motorrad S 1000 R 2020, Руководство пользователя для мотоциклиста, Страница: 172 / 286

Результаты поиска

Содержание S 1000 R 2020

Отзывы: