BMW Motorrad S 1000 R 2020 Скачать руководство пользователя страница 167

Страница: 167 / 286

161

How does dynamic engine

brake control work?

with riding modes Pro

The purpose of the dynamic

engine brake control is to

safely prevent unstable riding

conditions that are related to

excess drag torque at the rear

wheel. Depending on the road

condition and riding dynamics,

excess drag torque can make

the slip at the rear wheel

increase severely and impede

riding stability. The dynamic

engine brake control limits slip

at the rear wheel to a safe,

setpoint slip that is dependent

on the mode and angle.

Causes of excess slip at the

rear wheel:

Riding in coasting overrun on

a road with low coefficient of

friction (e.g. wet leaves).

Hopping when shifting gears

down.

Hard brake onset in sporty

riding style.

Like the DTC traction control,

the dynamic engine brake con-

trol compares the wheel cir-

cumferential velocities of the

front and rear wheel. With the

aid of more information on

the angle, the dynamic engine

brake control can determine

the slip or the stability reserve

at the rear wheel.

If the slip exceeds the respec-

tive limit value, the engine

torque is increased by slightly

opening the throttle valves. The

slip is reduced, and the vehicle

is stabilized.

Effect of the dynamic engine

brake control

In the RAIN and ROAD riding

modes: maximum stability.

In the DYNAMIC and

DYNAMIC PRO riding modes:

high stability.
Additionally in the

DYNAMIC PRO riding mode:

maximum performance.

Stability may be impaired on

poorly surfaced roads or if

using unsuitable tires.

DYNAMIC DAMPING CON-

TROL (DDC)

How does DDC work?

with Dynamic Damping Con-

trol (DDC)

Dynamic Damping Control

(DDC) is a semi-active chassis

and suspension system that

automatically responds to

riding maneuvers and to the

road condition. Using a ride

height sensor, DDC detects

movements of the chassis

Содержание S 1000 R 2020































































































































































































































































































Результаты поиска

Содержание S 1000 R 2020

Отзывы:

BMW Motorrad S 1000 R 2020, Руководство пользователя для мотоциклиста, Страница: 167 / 286

Результаты поиска

Содержание S 1000 R 2020

Отзывы: