BMW Motorrad S 1000 R 2020 Скачать руководство пользователя страница 135

Страница: 135 / 286

129

ATTENTION

Refueling with leaded fuel

Damage to catalytic converter

Do not refuel with leaded

gasoline or gasoline with

metallic additives, e.g. man-

ganese or iron.

ATTENTION

Use of Ethanol E85 as fuel

Damage to the engine and

fuel supply

Do not refuel with E85, i.e.

fuel with an ethanol content

of 85 %, or with Flex Fuel.

Observe the maximum

ethanol content of the fuel.

Fuel additives clean the

fuel injection system and

the combustion area. Fuel ad-

ditives should be used when

refueling with low-quality fu-

els or during longer periods

of downtime. Your authorized

BMW Motorrad retailer can

provide you with more detailed

information.

Recommended fuel

quality

Premium unleaded (93) (max.

5 % ethanol, E5)

91 AKI (98 ROZ/RON)

93 AKI

Alternative fuel quality

Premium unleaded (91;

restrictions with regard to

power and fuel consumption)

(max. 10 % ethanol, E10)

89 AKI (95 ROZ/RON)

90 AKI

Refueling procedure

WARNING

Fuel is highly flammable

Fire and explosion hazard

Do not smoke. Never bring

a naked flame near the fuel

tank.

WARNING

Escaping of fuel due to ex-

pansion under exposure to

heat with overfilled fuel tank

Accident hazard

Do not overfill the fuel tank.

Содержание S 1000 R 2020































































































































































































































































































Результаты поиска

Содержание S 1000 R 2020

Отзывы:

BMW Motorrad S 1000 R 2020, Руководство пользователя для мотоциклиста, Страница: 135 / 286

Результаты поиска

Содержание S 1000 R 2020

Отзывы: