BMW Motorrad S 1000 R 2020 Скачать руководство пользователя страница 80

Страница: 80 / 286

OPERATION

Turn signals are illuminated

twice.

Confirmation tone sounds

twice (if programmed).

DWA is armed.

with Keyless Ride

Switch off the ignition.

Press button

on the radio-

operated key twice.

Activation takes approximately

30 seconds to complete.

Turn signals are illuminated

twice.

Confirmation tone sounds

twice (if programmed).

DWA is armed.

To deactivate the motion sen-

sor (for example, if the motor-

cycle is being transported on

a train and the train's move-

ments could trigger the alarm

signal), press the button

the radio-operated key again

during the activation phase.

Turn signals are illuminated

three times.

Confirmation tone sounds

three times (if programmed).

Motion sensor is

deactivated.

Alarm signal

The DWA alarm signal can be

triggered by:

Motion sensor

Switch-on attempt with an

unauthorized ignition key.

Disconnecting the DWA from

the vehicle battery (DWA bat-

tery takes over the power

supply – alarm tone only, turn

signals do not flash)

If the DWA battery is dis-

charged, all functions remain

operational; the only difference

is that the alarm cannot be

triggered if the system is

disconnected from the vehicle

battery.
The duration of the alarm sig-

nal is approx. 26 seconds. Dur-

ing the alarm, an alarm signal

sounds, and the turn signals

flash. The type of alarm sound

Содержание S 1000 R 2020































































































































































































































































































Результаты поиска

Содержание S 1000 R 2020

Отзывы:

BMW Motorrad S 1000 R 2020, Руководство пользователя для мотоциклиста, Страница: 80 / 286

Результаты поиска

Содержание S 1000 R 2020

Отзывы: