BMW Motorrad R nineT Скачать руководство пользователя страница 57

Страница: 57 / 192

ASC indicator and warning
light remains off or contin-

ues to flash.

ASC activated.
As an alternative, the ignition
can also be switched off and
then on again.

If the ASC indicator and
warning light lights up

after switching the ignition off
and on and then continuing
driving with the following min-
imum speed, a ASC fault has
occurred.

min 6 mph (min 10 km/h)

Heated handlebar grips

with heated grips

Operating heated grips

NOTICE

The heated grips option can only
be activated when the engine is
running.

NOTICE

The increase in power
consumption caused by the
heated grips can drain the
battery if you are riding at low
engine speeds. If the battery is
inadequately charged, the heated
grips are switched off to ensure
starting capability.

Starting engine (

76).

Press button

repeatedly un-

til desired heating level

shown.

The handlebar grips can be
heated at two different levels.

100 % heating output

Approx. 50 % heater out-
put

The 2nd heating level is used
for fast heat-up of the grips;
then the switch should be
switched back to the 1st level.

Operation

Содержание R nineT

































































































































































































Результаты поиска

Содержание R nineT

Отзывы:

Бренды по названию

Популярные бренды

BMW Motorrad R nineT, Руководство пользователя для мотоциклиста

Результаты поиска

Содержание R nineT

Отзывы:

Бренды по названию

Популярные бренды