BMW Motorrad R nineT Скачать руководство пользователя страница 43

Страница: 43 / 192

High beam and headlight
flasher

Press switch

toward front to

switch on high beams.
Press switch

toward rear to

actuate headlight flasher.

Parking lights

Switch off ignition (

39).

Immediately after switching off
ignition, push button

to left

and hold it until parking lights
come on.
Switch ignition on and then off
again to switch off parking light.

Headlight courtesy delay
feature

Turn off ignition.

Immediately after turning off
the ignition, pull switch

back

and hold until the headlight
courtesy delay feature turns
on.
The vehicle lights light up for
one minute and then turn off
automatically.
This can be used after park-
ing the vehicle in order to illu-
minate the path to the house
door, for instance.

Operation

Содержание R nineT

































































































































































































Результаты поиска

Содержание R nineT

Отзывы:

BMW Motorrad R nineT, Руководство пользователя для мотоциклиста, Страница: 43 / 192

Результаты поиска

Содержание R nineT

Отзывы: