BMW Motorrad R nineT Urban G S Скачать руководство пользователя страница 36

Страница: 36 / 163

Ignition switch/steering
lock

Keys

You receive 2 ignition keys and a
special key for removing the seat
(

49).

If a key is lost or mislaid, consult
the information on the electronic
immobiliser (EWS) (

35).

Ignition switch/steering lock and
the fuel filler cap lock are oper-
ated with the same key.

Lock the handlebars

Turn the handlebars all the way
to left.

Turn the ignition key to
position

, while moving the

handlebars slightly.
Ignition, lights and all function
circuits are switched off.
Handlebars are locked.
Ignition key can be removed.

Switching on ignition

Turn the ignition key to posi-
tion

Side lights and all function cir-
cuits are switched on.
Engine can be started.
Pre-Ride-Check is performed.
(

61)

ABS self-diagnosis is in pro-
gress. (

62)

Operation

Содержание R nineT Urban G S




































































































































































Результаты поиска

Содержание R nineT Urban G S

Отзывы:

BMW Motorrad R nineT Urban G S, Руководство пользователя для мотоциклиста, Страница: 36 / 163

Результаты поиска

Содержание R nineT Urban G S

Отзывы: