BMW Motorrad R nineT Urban G S Скачать руководство пользователя страница 32 | Manualshive

Страница: 32 / 163

BMW Motorrad R nineT Urban G S Скачать руководство пользователя страница 32

ASC switched off

with Automatic Stability Control
(ASC)

OE

ASC telltale and warning
light shows.

Possible cause:
The rider has switched off the
ASC.

ASC Switching on (

ASC fault

with Automatic Stability Control
(ASC)

OE

ASC telltale and warning
light shows.

Possible cause:

with Automatic Stability Control
(ASC)

OE

The ASC control unit has detec-
ted a fault. The ASC function is
not available.

You can continue to ride. Bear
in mind that the ASC function
is not available. Please refer to

the more detailed information
on situations that may lead to
an ASC fault (

Have the fault rectified as
quickly as possible by a
specialist workshop, preferably
an authorised BMW Motorrad
dealer.

Anti-theft alarm battery
flat

with alarm system (DWA)

OE

Symbol for the DWA bat-
tery is displayed.

NOTICE

This error message shows briefly
only after the Pre-Ride-Check
completes.
Possible cause:
The integral battery in the anti-
theft alarm (DWA) has lost its
entire original capacity. There
is no guarantee that the DWA

will be operational if the vehicle
battery is disconnected.

Seek the advice of a specialist
workshop, preferably an author-
ised BMW Motorrad dealer.

Fuel reserve

The fuel quantity in the fuel tank
when the fuel reserve indicator
light is switched on is depend-
ent on the driving dynamics. The
more the fuel moves inside the
fuel tank (due to regularly chan-
ging angles of heel, frequent
braking and acceleration), the
more difficult it becomes to de-
termine the fuel reserve volume.
For this reason, the fuel reserve
volume cannot be displayed ex-
actly.

After the fuel reserve in-
dicator light is switched on,

the odometer for the fuel reserve
volume

TRIP R

is automatically

displayed.

3

30

z

Status indicators

«
...
30
31
32
33
34
...
»

Содержание R nineT Urban G S




































































































































































Отзывы:

Нет отзывов