BMW Motorrad R nineT Urban G S, Руководство пользователя для мотоциклиста

Страница: 102 / 163

Use jump leads fitted with fully
insulated crocodile clips at both
ends.
ATTENTION
Jump-starting with a voltage
greater than 12 V
Damage to the on-board elec-
tronics
Make sure that the battery of
the donor vehicle has a voltage
rating of 12 V.
Place the motorcycle on its
stand on firm, even ground.
Removing seat (
49).
Unclip the cover 1 at the bot-
tom ( arrow ) and remove to-
wards the top.
In a first step, connect the pos-
itive battery connection point
1
to the positive terminal of the
second battery using the red
jump lead.
Connect the ground support
point
2 to the negative terminal
of the second battery using the
black jump lead.
Run the engine of the donor
vehicle during jump-starting.
Start the engine of the vehicle
with the discharged battery
in the usual way; if the en-
gine does not start, wait a few
minutes before repeating the
attempt in order to protect the
starter motor and the donor
battery.
NOTICE
Do not use proprietary start-as-
sist sprays or other products to
start the engine.
Allow both engines to run for a
few minutes before disconnect-
ing the jump leads.
8
100
z Maintenance