BMW Motorrad R nineT/5, Руководство пользователя для мотоциклиста

Страница: 67 / 183

use jump leads and a donor bat-
tery to start.
See the subsection on jump
starting in "Maintenance" for
more details.
The engine starts.
Consult the troubleshooting
chart below if the engine re-
fuses to start. (
122)
Pre-Ride-Check
When the ignition is switched,
on the instrument cluster car-
ries out a test of the instruments,
the indicator and warning lights
and the display, the "Pre-Ride-
Check". The check is aborted
if you start the engine before it
completes.
Phase 1
All the segments in display 1
light up.
At the same time, all the indicator
and warning lights
3 are switched
on.
Phase 2
'General' warning light 2 changes
from ON to flashing.
The needle
4 for the speed
indicator moves to maximum
speed.
Phase 3
Needle 4 for the speedometer
drops to the zero position.
The indicator and warning lights
go out or assume operational
status, as applicable.
The malfunction indicator lamp
only goes out after 15 seconds.
The display switches to its ordin-
ary display mode. The on-board
computer readings appear on the
display.
If the needle did not move, an
indicator or warning light did not
show or segments in the display
failed to light up:
Have the fault rectified as
quickly as possible by a
specialist workshop, preferably
an authorised BMW Motorrad
dealer.
ABS self-diagnosis
BMW Motorrad Integral ABS per-
forms self-diagnosis to ensure its
operability. Self-diagnosis starts
6
65
z Riding