BMW Motorrad R 18, Руководство пользователя для мотоциклиста

Страница: 124 / 158

120 TECHNICAL DATA
Rear wheel
Type of rear-wheel guide Steel double armed swinging arm
Design of rear-wheel suspension Directly linked spring strut with adjustable
spring preload
Spring travel on the rear wheel 3.5 in (90 mm), on rear wheel
Basic setting of spring preload, rear Rotate hexagon head counterclockwise as
far as it will go., filled up with fuel, with
driver weighing approx. 85 kg
Rotate hexagon head counterclockwise
as far as it will go, then 6 rotations clock-
wise., One-up with vehicle load approx.
110 kg
Rotate hexagon head counterclockwise as
far as it will go, then 24 rotations clock-
wise., Two-up mode with vehicle load ap-
prox. 200 kg
BRAKES
Front wheel
Type of front wheel brake Two-rotor disk brake, diameter 300 mm, 4-
piston fixed caliper
Front brake pad material Sintered metal
Front brake disc thickness 0.2 in (5 mm), New
min 0.18 in (min 4.5 mm), Wear limit
Rear wheel
Type of rear wheel brake Single disc brake, diameter 300 mm, 4-
piston fixed caliper
Rear brake pad material Sintered metal
Rear brake disc thickness 0.28 in (7 mm), New
min 0.26 in (min 6.5 mm), Wear limit
WHEELS AND TIRES
Recommended tire combinations An overview of the current tire approvals
is available from your authorized
BMW Motorrad retailer or on the Internet at
bmw­motorrad.com/service .
Speed category of front/rear tires H, minimum requirement: 130 mph
(210 km/h)