BMW Motorrad R 1250 R Скачать руководство пользователя страница 69

Страница: 69 / 300

Switching off ignition

Turn the ignition key to posi-

tion

When the ignition is switched

off, the instrument cluster re-

mains switched on for a short

time and displays any existing

fault messages.

Handlebars not locked.

Electrically powered accessor-

ies remain operational for a

limited period of time.

The battery can be recharged

via the socket.

Vehicle key can be removed.
with daytime riding light

The daytime riding light goes

out soon after the ignition is

switched off.
with LED additional head-

light

The LED auxiliary headlights

go out soon after the ignition

is switched off.

Electronic immobiliser (EWS)

The on-board electronics ac-

cess the data saved in the ig-

nition key via a ring aerial in

the ignition lock. The ignition

is not enabled for starting un-

til the engine control unit has

recognised this ignition key as

"authorised" for your motor-

cycle.

A second ignition key at-

tached to the same ring

as the ignition key used to start

the engine could "irritate" the

electronics, in which case the

enabling signal for starting is

not issued.

Always keep the ignition keys

separate from each other.
If you lose an ignition key, you

can have it barred by your au-

thorised BMW Motorrad re-

tailer.

If you wish to do this, you will

need to bring all other keys for

the motorcycle with you. The

engine cannot be started by a

barred ignition key, but an ig-

nition key that has been barred

can subsequently be reactiv-

ated.

You can obtain extra keys

only through an authorised

BMW Motorrad retailer. The

ignition keys are part of an

integrated security system,

Содержание R 1250 R













































































































































































































































































































Результаты поиска

Содержание R 1250 R

Отзывы:

Бренды по названию

Популярные бренды

BMW Motorrad R 1250 R, Руководство пользователя для мотоциклиста

Результаты поиска

Содержание R 1250 R

Отзывы:

Бренды по названию

Популярные бренды