BMW Motorrad R 1250 R Скачать руководство пользователя страница 230

Страница: 230 / 300

224

CARE

CARE PRODUCTS

BMW Motorrad recommends

that you use the cleaning

and care products you can

obtain from your authorised

BMW Motorrad Retailer. The

substances in BMW Care

Products have been tested in

laboratories and in practice;

they provide optimised care

and protection for the materials

used in your vehicle.

ATTENTION

Use of unsuitable cleaning

and care products

Damage to vehicle parts

Do not use solvents such

as cellulose thinners, cold

cleaners, fuel or the like,

and do not use cleaning

products that contain alco-

hol.

ATTENTION

Use of strongly acidic or

strongly alkaline cleaning

agents

Damage to vehicle parts

Dilute in accordance with

the dilution ratio stated on

the packaging of the clean-

ing agent.

Do not use strongly acidic

or strongly alkaline cleaning

agents.

WASHING THE VEHICLE

BMW Motorrad recommends

that you use BMW insect re-

mover to soften and wash off

insects and stubborn dirt on

painted parts prior to washing

the vehicle.

To prevent stains, do not wash

the vehicle immediately after

it has been exposed to strong

sunlight and do not wash it in

the sun.

Remove dirt from the fork legs

at regular intervals.

Make sure that the vehicle is

washed frequently, especially

during the winter months.

To remove road salt, clean the

motorcycle with cold water im-

mediately after every trip.

Содержание R 1250 R













































































































































































































































































































Результаты поиска

Содержание R 1250 R

Отзывы:

Бренды по названию

Популярные бренды

BMW Motorrad R 1250 R, Руководство пользователя для мотоциклиста

Результаты поиска

Содержание R 1250 R

Отзывы:

Бренды по названию

Популярные бренды