BMW Motorrad R 1250 R Скачать руководство пользователя страница 17

Страница: 17 / 300

is also provided on the

relevant data protection law.

Personal data may be used to

provide online services. Data

is exchanged using a secure

connection, for example with

the IT systems provided by the

vehicle manufacturer.

Obtaining, processing and us-

ing personal data outside of

the normal provision of ser-

vices requires legal permission,

contractual agreement or con-

sent. It is also possible to have

the entire data connection ac-

tivated or deactivated. Stat-

utory functions are excluded

from this.

Services from other providers

When using online services

from other providers, these

services are subject to the re-

sponsibility and the data pro-

tection and operating con-

ditions of the individual pro-

vider. The vehicle manufacturer

has no influence on the con-

tent that is exchanged in this

instance. Information on the

type, scope and purpose of the

data capture and use of per-

sonal data as part of the ser-

vices of third parties can be

ascertained from the individual

provider.

INTELLIGENT EMERGENCY

CALL SYSTEM

with intelligent emergency

call

Principle

The intelligent emergency call

system enables manual or auto-

matic emergency calls, for ex-

ample in the event of an acci-

dent.

The emergency calls are re-

ceived by an emergency call

centre that is commissioned by

the vehicle manufacturer.

For information on operating

the intelligent emergency call

system and its functions, please

refer to "Intelligent emergency

call".

Legal basis

Processing of personal data

using the intelligent emergency

call system is in line with the

following regulations:

Protection of personal data:

Directive 95/46/EC of the

European Parliament and of

the Council.
Protection of personal data:

Directive 2002/58/EC of the

European Parliament and of

the Council.

The legal basis for the activa-

tion and function of the intelli-

Содержание R 1250 R













































































































































































































































































































Результаты поиска

Содержание R 1250 R

Отзывы:

Бренды по названию

Популярные бренды

BMW Motorrad R 1250 R, Руководство пользователя для мотоциклиста

Результаты поиска

Содержание R 1250 R

Отзывы:

Бренды по названию

Популярные бренды