BMW Motorrad R 1250 GS 2002, Руководство пользователя для мотоциклиста

Страница: 143 / 338

137
Pre-Ride-Check
The instrument cluster runs a
test of the instruments and the
indicator and warning lights
when the ignition is switched
on. This test is known as the
Pre-Ride-Check. The check is
aborted if you start the engine
before it completes.
Phase 1
All indicator and warning lights
are switched on.
After a longer vehicle stand-
still period, an animation is dis-
played when the system starts
up.
Phase 2
The 'General' warning light
changes from red to yellow.
Phase 3
All the indicator and warning
lights switched on in the initial
phase are switched off in re-
verse sequence.
The malfunction indicator lamp
(MIL) does not go out until
15 seconds have elapsed.
If one of the indicator and
warning lights did not switch
on:
Have the fault rectified as
quickly as possible by a spe-
cialist workshop, preferably an
authorised BMW Motorrad re-
tailer.
ABS self-diagnosis
BMW Motorrad Integral
ABS Pro performs self-
diagnosis to ensure its
operability. Self-diagnosis
starts automatically when you
switch on the ignition.
Phase 1
Test of the diagnosis-compat-
ible system components with
the vehicle at a standstill.
flashes.
Phase 2
Test of the wheel-speed
sensors as the vehicle pulls
away from rest.
flashes.
ABS self-diagnosis completed
The ABS indicator and warn-
ing light goes out.
ABS self-diagnosis not
completed
The ABS function is not
available, because self-
diagnosis did not complete.
(The motorcycle has to reach
a defined minimum speed for
the wheel speed sensors to
be checked: 5 km/h)