BMW Motorrad Navigator IV Owner’s Manual
Customizing the Navigator IV
E
N
add
(or
Subscriptions
>
add
)
—
add a
new subscription to a traffic service. Go to
to purchase a
subscription.
The traffic subscription code cannot be
reused. You must obtain a new code each
time you renew your service. If you own
multiple FM traffic receivers, you must
obtain a new code for each receiver.
Changing Bluetooth
Technology Settings
Touch
Tools
>
Settings
>
Bluetooth
.
Phone
or
audio
—select
add
>
oK
to pair
with a device that has Bluetooth wireless
technology. To listen to high-quality
audio wirelessly, connect to a Bluetooth
headset that supports the A2DP profile.
See
. Select
Change
to pair
and connect with a different device. The
Navigator IV
PIN code (or passkey) is
1234
.
Drop
—select the device you want to
disconnect, and touch
Yes
.
remove
—select the device you want to
delete from the Navigator IV memory,
and touch
Yes
.
Bluetooth
—enable and disable the
Bluetooth component. The
Bluetooth
icon appears on the Menu page if the
Bluetooth component is enabled. To prevent
a device from automatically connecting,
select
Disabled
.
Friendly name
—
enter a friendly name that
identifies your Navigator IV on devices with
Bluetooth technology. Touch
Done
.
restore
—restore the original Bluetooth
settings. This does not clear the pairing
information.
Changing the Proximity
Points Settings
You must have proximity points (such as
custom POIs, a safety camera database,
or a TourGuide
®
file) loaded to adjust the
proximity point settings. See
.
Touch
Tools
>
Settings
>
Proximity Points
.
Proximity alerts
—touch
Change
to turn the
alerts on or off when you approach custom
POIs or safety cameras.
Tourguide
—set how you want the audio for
TourGuide to be activated. Select
auto Play
to hear the complete tour as programmed;
Prompted
to show the speaker icon on
the map when tour information is available
during your route; or
off
.
restore
—restore the original proximity
points settings.