BMW Motorrad Navigator IV Owner’s Manual
Using Hands-free Calling
E
N
5. Select your phone, and touch
OK
.
6. Enter
1234
into your phone.
Pairing the Navigator IV with
Your Wireless Headset
To listen to high-quality audio, you can
connect an Advanced Audio Distribution
Profile (
A2DP) Bluetooth headset.
When the Navigator IV is in the motorcycle
mount, the internal speaker will be disabled,
and you can only receive calls and listen to
voice prompts and MP3s through a wireless
headset/helmet. For more information, see
.
1. From the Menu page, touch
Tools
>
Settings
>
Bluetooth
>
Enabled
.
2. Under Audio, touch
Add
.
3. Turn on your headset, and enable
Find Me/Discoverable/Visible mode, if
necessary.
4. Touch
OK
on the Navigator IV.
5. Select your headset, and touch
OK
.
6. Enter the Bluetooth PIN/passkey for your
headset, if necessary, and touch
Done
.
7. Touch
OK
.
Receiving a Call
When you receive a call, the Incoming Call
window appears. Touch
answer
to answer
the call. Touch
ignore
to ignore the call and
silence the ring.
While the Navigator IV is in the motorcycle
mount, you can only receive a call through a
headset.
In a Call
To end a call, touch >
end Call
. Touch
>
Call options
for the following options:
Touch Tones
—displays a keypad page so
you can use automated systems, such as
voice mail.
•
Transfer audio To Phone
—this is
helpful if you want to turn off the
Navigator IV but stay on the call, or if
you need privacy. To switch back, touch
Transfer audio To Device
.
Mute Microphone
.
Phone Menu
From the Menu page, touch
Phone
to view
the Phone menu. Touch
Status
to view the
signal strength, the battery level, and the
name of the connected phone.
noTe:
Not all phones support all features
of the Navigator IV Phone menu.
•
•
