BMW Motorrad K 1600B Series, Руководство пользователя для мотоциклиста

Страница: 132 / 221

Affect of wheel sizes
on suspension control
systems
The wheel sizes play a major role
in the ABS and DTC suspension-
control systems. The diameter
and width of the wheels stored
in the control unit have particular
significance as the basis for all
necessary calculations. A change
in these sizes resulting from con-
version to wheels not installed
as standard equipment can seri-
ously affect the control efficiency
of these systems.
The sensor rings are essential
for correct wheel speed detec-
tion; they too must match the
motorcycle's control systems and
consequently cannot be replaced.
If you want to equip your
motorcycle with different wheels,
please contact a specialist
service facility, preferably a
BMW Motorrad retailer. In some
cases the data stored in the
control units can be adapted for
the new wheel sizes.
TPC/RDC sticker
with tire pressure monitor
(TPM)
OE
ATTENTION
Improper tire removal
Damage to the TPC/RDC sen-
sors
Inform a specialist service
facility or an authorized
BMW Motorrad retailer on the
fact that the wheel is equipped
with a TPC/RDC sensor.
On motorcycles equipped with
TPC/RDC, a corresponding
sticker is located on the wheel
rim at the position of the TPC/
RDC sensor. During a tire
change it must be ensured
that the TPC/RDC sensor
is not damaged. Inform the
BMW Motorrad retailer or the
authorized workshop of the TPC/
RDC sensor.
Removing front wheel
Make sure ground is level and
firm and place motorcycle on
its center stand.
8
130
z Maintenance