BMW Motorrad K 1600B Series, Руководство пользователя для мотоциклиста, Страница: 72 / 221

Alarm signal
The DWA alarm can be set off
by:
Motion sensor
Switching on ignition with an
unauthorized ignition key.
Disconnecting the DWA from
the motorcycle battery (DWA
battery takes over the power
supply – alarm sound only, haz-
ard warning lights do not flash).
If the DWA battery is discharged
all functions remain operational;
the only difference is that the
alarm cannot be set off if the
system is disconnected from the
motorcycle battery.
The duration of the alarm is ap-
prox. 26 seconds. During the
alarm, an alarm tone sounds and
the turn indicators flash. The
type of alarm tone can be pro-
grammed in the multifunction
display.
You can cancel an alarm at any
time without deactivating the
DWA by pressing button
2 on
the remote key or key fob trans-
mitter.
If an alarm was triggered while
the motorcycle was unattended,
the rider is notified accordingly
by an alarm tone sounding once
when the ignition is turned on.
The DWA LED then signals the
reason for the alarm for one
minute.
Light signals on DWA LED:
1 flash: Motion sensor 1
2 flashes: Motion sensor 2
3 flashes: ignition turned on
with unauthorized ignition key
4 flashes: alarm system dis-
connected from vehicle battery
5 flashes: motion sensor 3
Deactivate without remote
key or radio-operated key
Emergency on/off switch (kill
switch) in normal operating po-
sition.
Switch on the ignition.
Turn indicators light up once.
Confirmation tone sounds once
(if programmed).
Alarm system is deactivated.
4
70
z Operation