BMW Motorrad K 1600 B 2021, Руководство пользователя для мотоциклиста, Страница: 154 / 294

148 RIDING
Press starter button 1 .
The start attempt is auto-
matically interrupted if
battery voltage is too low. Re-
charge the battery before you
start the engine, or use jump
leads and a donor battery to
start.
See the subsection on jump
starting in "Maintenance" for
more details.
The engine starts.
Consult the troubleshooting
chart below if the engine re-
fuses to start. ( 220)
Pre-Ride-Check
The instrument cluster runs a
test of the instruments and the
indicator and warning lights
when the ignition is switched
on. This test is known as the
Pre-Ride-Check. The test is
aborted if you start the engine
before it completes.
Phase 1
All indicator and warning lights
are switched on.
After a longer vehicle stand-
still period, an animation is dis-
played when the system starts
up.
Phase 2
The 'General' warning light
changes from red to yellow.
Phase 3
All the indicator and warning
lights switched on in the initial
phase are switched off in re-
verse sequence.
The malfunction indicator lamp
(MIL) does not go out until
15 seconds have elapsed.
If one of the indicator and
warning lights did not switch
on:
Have the fault rectified as
quickly as possible by a spe-
cialist workshop, preferably an
authorised BMW Motorrad re-
tailer.
ABS self-diagnosis
BMW Motorrad Integral ABS
Pro performs self-diagnosis
to ensure its operability. Self-
diagnosis starts automatically
when you switch on the igni-
tion.