BMW Motorrad G 310 R, Руководство пользователя для мотоциклиста

Страница: 61 / 166

55
Phase 1
Check on system compo-
nents monitored by diagnostic
system while motorcycle is
parked.
flashes.
Phase 2
Check wheel sensors while
starting off.
flashes.
ABS self-diagnosis completed
ABS warning light goes out.
ABS self-diagnosis rou-
tine not completed
The ABS function is not avail-
able, as the self-diagnosis
function has not been com-
pleted. (The motorcycle must
reach a specified minimum
speed before the system can
check operation of the wheel
sensors: min 3 mph (min
5 km/h))
If an ABS error is displayed af-
ter the ABS self-diagnosis is
completed:
It remains possible to con-
tinue riding. It must be noted
that the ABS function is not
available.
Have the malfunction cor-
rected as soon as possible at
an authorized specialist work-
shop, preferably an authorized
BMW Motorrad retailer.
BREAKING IN
Engine
In the period preceding the
running-in check (initial in-
spection), attempt to change
rpm and engine load as fre-
quently as possible, avoiding
extended periods at constant
rpm.
Choose curvy, slightly hilly
sections of road if possible.
Observe the engine run-in
speeds.
Engine run-in speed
<6000 min -1 (Odometer
reading 0...186 miles
(0...300 km))
No full throttle (Odometer
reading 0...621 miles
(0...1000 km))
Observe mileage, after which
the running-in check should
be performed.
Mileage until running-in
check
311...746 miles
(500...1200 km)