BMW Motorrad F 750 GS 2021, Руководство пользователя для мотоциклиста

Страница: 54 / 314

48 STATUS INDICATORS
ates to more than the minimum
speed stated below:
RDC sensor is not active
min 30 km/h (The RDC
sensor does not transmit its
signal to the vehicle until a
certain minimum speed has
been reached.)
The tyre pressures
are shown in the TFT
display as temperature
compensated and always
refer to the following tyre air
temperature:
20 °C
If the tyre symbol appears
as well, showing yellow or
red, this is a warning.
The stated tolerance
ranges for tyre pressures
are referenced to one-up
riding.
If the value in question is
close to the limit of the
permissible tolerance range,
the reading is accompanied
by the 'General' warning light
showing yellow.
The 'General' warning
light flashes red if the
tyre pressure registered by the
sensor is outside the permiss-
ible tolerance range.
For further information about
BMW Motorrad RDC, see the
section entitled "Engineering
details" ( 167).
Tyre pressure close to limit of
permitted tolerance
with tyre pressure control
(RDC) OE
lights up yellow.
is displayed in yellow.
Tyre pressure does
not match setpoint.
Check tyre pressure.
Possible cause:
Measured tyre pressure is close
to the limit of permitted toler-
ance.
Correct tyre pressure.
Before adjusting tyre pres-
sure, read the information on
temperature compensation
and adjusting pressure in the
section entitled "Engineering
details":
Temperature compensation
( 168)
Pressure adaptation ( 169)