BMS C1
Picture 6
Picture 5
Picture 7
4
2.2.3
2.2.3 install the objective
(picture No.5-6)
1:
Adjust the coarse & fine focus
knob, till the mechanical stage to
the low limited place.
2. Screw down the objective to
nosepiece one by one.
Clean the objective frequently.
At first, use the 10X objective to
looking for image, then change
another one.
Turn the objective till hear the
“kaca” sound, make sure the
objective enter the objective
center.
2.2.4
Install the filter (picture 7)
1.
Swing out the condenser holder
①
2.
Put the filter in the holder. Then
swing the holder in.
