Bms Bulut Makina SR210 Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 18

Bms Bulut Makina SR210 Скачать руководство пользователя страница 14

14

4.1 Roughness parameter and display range

Parameter

Display range

Ra
Rq

0.005μm ~ 16μm

Rz
Rt

0.02μm ~ 160μm

4.2 Temperature/humidity range

Working environment:

temperature: 0

℃

~ 40

℃

Humidity: < 90% RH

Storage and transportation environment: temperature: - 25

℃

~ 60

℃

Humidity: < 90% RH

4.3 Connection with printer

All measurement parameters can be printed out if connect with professional printer. Printer is optional.

5 Daily care and maintenance



Please try to avoid the situations such as collision, strenuous vibration, heavy dust, humidity, greasy dirt, and strong

magnetic field;



Probe is the precision part of instrument, please maintain it carefully. Please put it back to packing box after each

measurement.



The standard model of the instrument should be protected carefully to avoid any misalignment of calibration

instrument after scratch.

5.1 Fault treatment

If there are any fault for the instrument, please process according to measures which stated on the following chapter of
fault message; please send it back to factory for repair if it still could not work properly. Please do not take down and
repair by yourselves. Please attach the warranty card and standard model of the instrument together with the instrument
which need repair, also please explain the fault phenomenon.

5.2 Fault message

Fault display

Reason

E01

Hardware circuit fault

E11

Exceeds measurement range

E12

Electrical machine fault

E13

Probe dropping out process

E14

Please set up on upper machine

6 Battery ON/OFF switch

As shown in the following figure, the switch on the instrument backside is the battery ON/OFF switch.

Note: 1. Please turn off the battery switch if do not use for long time. This
can help to extend the working life of battery.

2. When the instrument leave factory, the battery ON/OFF switch is on OFF position.

«
...
12
13
14
15
16
...
»

Содержание SR210



















Отзывы:

Нет отзывов