15
PAIRING THE ODYSSEYLINK
To pair the OdysseyLink to the OdysseyControl:
1.
Make sure that the OdysseyLink is connected to the BatteryPlus35 and the
BatteryPlus35 is powered on.
2.
Press the Pairing Button on the OdysseyLink.The LED Status Indicator on
the OdysseyLink will flash green, indicating you have 30 seconds to pair the
OdysseyLink to the OdysseyControl.
3.
Launch the Odyssey App and press scan at the prompt. If the Odyssey App
requests access to the device’s location, allow access.
4.
The Odyssey App will now search for nearby OdysseyLink devices. Once this
is complete a pop-up window will appear with a list of OdysseyLink devices
available for connection.
5.
Select the device with the number that corresponds to the last six digits of
the serial number of the OdysseyLink you wish to pair to.
If successful, the Pairing Status icon on the Odyssey App will show that the
OdysseyControl and OdysseyLink are connected.
Figure 4:
Pairing the OdysseyLink to the OdysseyControl
USING THE ODYSSEY
Содержание OdysseyControl
