background image

BL

Extender

The BLExtender is a Bluetooth range extender, designed to allow you to use your BMPRO SmartConnect and Switch 
devices from every corner of your RV without worrying about losing Bluetooth signal. 

Mounting the BLExtender

The BLExtender should be mounted in a central location 
between the sensors and the node. It is mounted using four 
#8 screws at the mounting points.

Powering the BLExtender

Power the BLExtender using a maximum 14GA wire from a 
12V power source.

System Compatibility

The BLExtender is compatible with BMPRO’s 
JAYCOMMAND/TravelLINK system. Your firmware or app 
may need to be updated prior to pairing. Check your user 
manual for details on how to update your firmware and app.

Pairing the BLExtender to the Node with a Controller

To use the BLExtender, it must be paired to the Node. 
To pair the BLExtender to your system if it has a Controller:

1. 

Once mounted and powered using the included 

connector, press the pair button. 

2. 

Using the 

<

 or

 >

 buttons on the Controller, navigate to 

the 

PA

 menu item.

3. 

When ‘PA’ appears on the display, press the 

EXT

 button 

to start the pairing process to the Node. ‘PA’ will blink 

for a maximum of 30 seconds or until the BLExtender is 

connected.

POWERING Y

OUR ADVE

NTURE

S

STATE

LED STATUS

Initialization

Flashing white and yellow

Pairing

Flashing blue

Paired and connected

Flashing green

Forgetting node

Flashes white twice

Re-connecting with a 
paired node

Flashing red and blue

Pairing with unsupported 
firmware

Flashing red

LED Status Table

Pairing Button

Adjustable Antenna

Power Connector

TEAM

BMPRO

.COM

Manual Part 

036297

Rev 

1.0

If the BLExtender is not paired and connected within 30 seconds, you will need to press the pairing button again.
The LED will flash different colors during the pairing process, refer to the LED status table for more information.
Once the BLExtender is paired, it will begin extending the Bluetooth range of all SmartConnect sensors and any Switch 
connected to the Node!

19 Henderson Rd, Knoxfield, VIC 3180 Australia 
Unit 1, 821 E Windsor Ave, Elkhart IN 46514 USA

 

[email protected]

Отзывы: