22
DISCONNECTING A BATTERY FROM THE ASPOWER
To disconnect a battery from the ASPower:
1.
Power off all loads connected to the ASPower. The simplest way is with the
switch connected to the ASPower Load Isolation input.
2.
Turn off and remove all power sources (mains/solar/AUX) to the ASPower.
3.
Disconnect the battery’s negative (black) terminal from the ASPower Batt-
connection point.
4.
Disconnect the battery’s positive (red) terminal from the ASPower Batt+
connection point.
Figure 4:
Recommended wiring for connecting batteries in parallel
CONNECTING MULTIPLE BATTERIES
Before connecting multiple batteries in parallel to the ASPower, check that all
batteries are:
9
Of the same type, for example a deep cycle AGM battery.
9
Of the same capacity, for example 100Ah.
9
By the same manufacturer.
9
Fully charged.
9
Of the same age-never use batteries that differ in age.
The recommended wiring for connecting multiple batteries in parallel to the
ASPower is given in Figure 4. Depending on system requirements, a qualified
auto-electrician may wire the batteries differently.
Содержание ASPero
