BMPRO ASPero, Руководство пользователя

Страница: 17 / 40

17
Figure 3: ASPower Mounting Diagram
INSTALLATION INSTRUCTIONS
MOUNTING THE ASPOWER
The ASPower should be securely mounted to a suitably rigid surface, using four
pre-drilled mounting holes.
The preferred orientation is with the load connection at the bottom.It is
recommended the mounting holes are located so that there is a minimum of
80mm free air space from all vented sides of ASPower. This allows for the lowest
operating temperature of the internal electronics and the highest reliability of
the product.
The final enclosure must provide adequate ventilation to the outside world
(or larger internal cavity) to prevent excessive heating of the air within the
enclosure.